Simtec is leading fire simulation software that uses advanced models and numerical techniques to enhance simulation reliability and reduce simulation time. It has powerful pre- and post-processing capabilities to simplify model setup and effectively present results. Simtec allows efficient simulation of complex fire scenarios in areas like building fires, tunnel fires, and mining that were previously impossible or impractical with other software. It has been successfully used across industries for applications involving fire safety, HVAC, energy, and more.
Siemens SW Multidisciplinary simulation in the chemical and process industry.pdfEvgenyKulish1
The document discusses how computational fluid dynamics (CFD) simulation is becoming more widely used in the chemical and process industries. It describes a new workflow tool within Siemens' Simcenter STAR-CCM+ software that makes mixing vessel simulation more accessible to engineers. The mixing vessel workflow allows users to easily set up, run, and analyze mixing simulations. It handles geometry creation, meshing, solver setup and includes automated post-processing and parameterized designs to enable design space exploration. This new tool is lowering barriers to using CFD for engineers seeking to solve mixing problems and optimize chemical processes.
Digital Twin refers to a physical and functional description of a component, product or system together with all available operational data. This includes all information which could be useful in current and subsequent lifecycle phases. Benefit of it for mechatronic and cyber-physical systems is to provide the information created during design and engineering also at the operation of the system. The comprehensive networking of all information, shared between partners and connecting design, production and usage, forms the presented paradigm of next generation Digital Twin.
This document summarizes a training seminar on solving fluid flow problems using CFD software. The seminar was held at the Centre For Fire, Explosive & Environmental Safety (CFEES) under DRDO. The seminar covered an introduction to CFD modeling strategies and objectives to solve (1) hydraulic pipe network problems using Flowmaster software and (2) combustion gas flow through an exhaust duct of a lab-scale facility using Flowmaster and Fluent. The document provides details on modeling steps, input parameters, and results for both objectives.
24 OCT 2016 - Introduction to PyroSim & Engineering ApplicationsBSD Singapore
The leading industry graphical user interface for Fire Dynamics Simulator (FDS), PYROSIM, is recognized for its quick, reliable and precise simulation of complex fire models. It enables design teams to create complicated and cost-efficient designs in the preliminary stage without compromising desired level of fire safety.
The objective of this Workshop is for engineers to gain an understanding of fire dynamics and fire modeling. The guided hands-on workshop will help you to familiarize with the graphical interface and work towards customizing and prescribing your own fire scenarios.
The document is a seminar report submitted by Faheem M M to the APJ Abdul Kalam Technological University in partial fulfillment of the requirements for a Bachelor of Technology degree in Mechanical Engineering. The report discusses digital twin technology, providing an introduction, literature review, explanation of how digital twins work and are implemented, steps to create a digital twin, underlying technologies, advantages, disadvantages, applications, and conclusion.
Optimization of Fire Suppression using Fire Dynamics SimulatorIRJET Journal
This document discusses optimizing fire suppression systems using fire dynamics simulation. It focuses on using the Fire Dynamics Simulator (FDS) to optimize smoke control systems in buildings and water mist fire suppression systems. The researchers developed an optimum design method for these systems using FDS that proved useful for fire prevention system design. They aim to apply this optimization approach coupling FDS and optimization methods to other urban safety designs.
This document provides information about a Computational Fluid Dynamics course taught by Prof. Dr. RAO Yu at Shanghai Jiao Tong University. The course will cover fundamental CFD theories, techniques, and applications. Students will work in groups on projects and submit a final report making up 40-50% of their grade. The textbook is Computational Fluid Dynamics: A Practical Approach and lectures will introduce governing equations, numerical methods, discretization, and turbulence modeling. CFD can provide detailed flow field simulations to complement experimental and analytical approaches in engineering design and research.
Siemens SW Multidisciplinary simulation in the chemical and process industry.pdfEvgenyKulish1
The document discusses how computational fluid dynamics (CFD) simulation is becoming more widely used in the chemical and process industries. It describes a new workflow tool within Siemens' Simcenter STAR-CCM+ software that makes mixing vessel simulation more accessible to engineers. The mixing vessel workflow allows users to easily set up, run, and analyze mixing simulations. It handles geometry creation, meshing, solver setup and includes automated post-processing and parameterized designs to enable design space exploration. This new tool is lowering barriers to using CFD for engineers seeking to solve mixing problems and optimize chemical processes.
Digital Twin refers to a physical and functional description of a component, product or system together with all available operational data. This includes all information which could be useful in current and subsequent lifecycle phases. Benefit of it for mechatronic and cyber-physical systems is to provide the information created during design and engineering also at the operation of the system. The comprehensive networking of all information, shared between partners and connecting design, production and usage, forms the presented paradigm of next generation Digital Twin.
This document summarizes a training seminar on solving fluid flow problems using CFD software. The seminar was held at the Centre For Fire, Explosive & Environmental Safety (CFEES) under DRDO. The seminar covered an introduction to CFD modeling strategies and objectives to solve (1) hydraulic pipe network problems using Flowmaster software and (2) combustion gas flow through an exhaust duct of a lab-scale facility using Flowmaster and Fluent. The document provides details on modeling steps, input parameters, and results for both objectives.
24 OCT 2016 - Introduction to PyroSim & Engineering ApplicationsBSD Singapore
The leading industry graphical user interface for Fire Dynamics Simulator (FDS), PYROSIM, is recognized for its quick, reliable and precise simulation of complex fire models. It enables design teams to create complicated and cost-efficient designs in the preliminary stage without compromising desired level of fire safety.
The objective of this Workshop is for engineers to gain an understanding of fire dynamics and fire modeling. The guided hands-on workshop will help you to familiarize with the graphical interface and work towards customizing and prescribing your own fire scenarios.
The document is a seminar report submitted by Faheem M M to the APJ Abdul Kalam Technological University in partial fulfillment of the requirements for a Bachelor of Technology degree in Mechanical Engineering. The report discusses digital twin technology, providing an introduction, literature review, explanation of how digital twins work and are implemented, steps to create a digital twin, underlying technologies, advantages, disadvantages, applications, and conclusion.
Optimization of Fire Suppression using Fire Dynamics SimulatorIRJET Journal
This document discusses optimizing fire suppression systems using fire dynamics simulation. It focuses on using the Fire Dynamics Simulator (FDS) to optimize smoke control systems in buildings and water mist fire suppression systems. The researchers developed an optimum design method for these systems using FDS that proved useful for fire prevention system design. They aim to apply this optimization approach coupling FDS and optimization methods to other urban safety designs.
This document provides information about a Computational Fluid Dynamics course taught by Prof. Dr. RAO Yu at Shanghai Jiao Tong University. The course will cover fundamental CFD theories, techniques, and applications. Students will work in groups on projects and submit a final report making up 40-50% of their grade. The textbook is Computational Fluid Dynamics: A Practical Approach and lectures will introduce governing equations, numerical methods, discretization, and turbulence modeling. CFD can provide detailed flow field simulations to complement experimental and analytical approaches in engineering design and research.
Danfoss Shields Its Third Party Applications From Security Threats with patch...Flexera
Business Challenge: Across the organisation, Danfoss employees had increased their usage of third-party applications, and IT security required a method to effectively assess and monitor the software for vulnerabilities.
The document discusses 10 myths of computational fluid dynamics (CFD). It summarizes the original 5 myths from a previous paper, then introduces 4 new myths and discusses them further. The original myths were that CFD is too difficult, takes too long, is too expensive, cannot use CAD models directly, and that most products do not need CFD analysis. The document argues that advances have debunked these myths and made CFD more accessible. The 4 new myths discussed are that usability is not important, accuracy must be sacrificed for speed, experts are needed for accurate results, and production CAD is too complex for analysis. The document argues these new myths are also false given technological advances.
(MC²)²: A Generic Decision-Making Framework and its Application to Cloud Comp...Dr.-Ing. Michael Menzel
The document proposes a generic decision-making framework called (MC2)2 for evaluating IT infrastructure options like cloud computing. It presents an example scenario of a chocolate company called ExamChoc choosing between an in-house datacenter, third-party provider or IaaS provider for a new CRM system. Alternatives, criteria and requirements are defined for the scenario. The Analytic Network Process (ANP) multi-criteria decision method is selected and configured by defining weights and criteria dependencies. The method is applied and results show IaaS scoring higher overall but in-house being better on benefits. Future work ideas include more decision support within the framework.
Cadence Publishes Comprehensive Book onMixed-Signal Method.docxclairbycraft
Cadence Publishes Comprehensive Book on
Mixed-Signal Methodology; The "Mixed-Signal
Methodology Guide" Provides Expert Direction
on How to Address Design, Verification and
Implementation Challenges of Modern Mixed-
Signal Designs
Publication info: M2 Presswire ; Coventry [Coventry]14 Aug 2012.
ProQuest document link
ABSTRACT
SAN JOSE, Calif. -- Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation,
today announced availability of the critically acclaimed and much anticipated comprehensive design methodology
book for chip designers and CAD engineers that focuses on current and future advanced mixed-signal design
challenges and solutions. The "Mixed-Signal Methodology Guide" provides an overview of the design, verification
and implementation methodologies required for advanced mixed-signal designs. The book brings together top
mixed-signal design experts from across the industry -- including authors from Boeing, Cadence(R), ClioSoft and
Qualcomm -- to address the complex problems facing the mixed-signal design community.
"Modern mixed-signal design require new methodologies to improve productivity, reduce design time and achieve
silicon success," said Hao Fang, engineering director at LSI. "The Mixed-Signal Methodology Guide is a thorough
reference book on advanced verification and implementation methodologies. It will be particularly useful to mixed-
signal verification engineers for its coverage of analog behavioral modeling, and assertion and metric driven
verification methodology as applied to analog and mixed-signal design."
FULL TEXT
M2 PRESSWIRE-August 14, 2012-Cadence Publishes Comprehensive Book on Mixed-Signal Methodology; The
"Mixed-Signal Methodology Guide" Provides Expert Direction on How to Address Design, Verification and
Implementation Challenges of Modern Mixed-Signal Designs
(C)2012 M2 COMMUNICATIONS http://www.m2.com
August 13, 2012
SAN JOSE, Calif. -- Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation,
today announced availability of the critically acclaimed and much anticipated comprehensive design methodology
book for chip designers and CAD engineers that focuses on current and future advanced mixed-signal design
challenges and solutions. The "Mixed-Signal Methodology Guide" provides an overview of the design, verification
and implementation methodologies required for advanced mixed-signal designs. The book brings together top
mixed-signal design experts from across the industry -- including authors from Boeing, Cadence(R), ClioSoft and
Qualcomm -- to address the complex problems facing the mixed-signal design community.
The growing complexity of today's mixed-signal designs requires major changes in design methodology to both
increase productivity and deliver high quality products on time. This wide-ranging compendium examines in depth
such topics as AMS behavioral modeling, mixed-signal me.
Cadence Publishes Comprehensive Book onMixed-Signal Method.docxjasoninnes20
Cadence Publishes Comprehensive Book on
Mixed-Signal Methodology; The "Mixed-Signal
Methodology Guide" Provides Expert Direction
on How to Address Design, Verification and
Implementation Challenges of Modern Mixed-
Signal Designs
Publication info: M2 Presswire ; Coventry [Coventry]14 Aug 2012.
ProQuest document link
ABSTRACT
SAN JOSE, Calif. -- Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation,
today announced availability of the critically acclaimed and much anticipated comprehensive design methodology
book for chip designers and CAD engineers that focuses on current and future advanced mixed-signal design
challenges and solutions. The "Mixed-Signal Methodology Guide" provides an overview of the design, verification
and implementation methodologies required for advanced mixed-signal designs. The book brings together top
mixed-signal design experts from across the industry -- including authors from Boeing, Cadence(R), ClioSoft and
Qualcomm -- to address the complex problems facing the mixed-signal design community.
"Modern mixed-signal design require new methodologies to improve productivity, reduce design time and achieve
silicon success," said Hao Fang, engineering director at LSI. "The Mixed-Signal Methodology Guide is a thorough
reference book on advanced verification and implementation methodologies. It will be particularly useful to mixed-
signal verification engineers for its coverage of analog behavioral modeling, and assertion and metric driven
verification methodology as applied to analog and mixed-signal design."
FULL TEXT
M2 PRESSWIRE-August 14, 2012-Cadence Publishes Comprehensive Book on Mixed-Signal Methodology; The
"Mixed-Signal Methodology Guide" Provides Expert Direction on How to Address Design, Verification and
Implementation Challenges of Modern Mixed-Signal Designs
(C)2012 M2 COMMUNICATIONS http://www.m2.com
August 13, 2012
SAN JOSE, Calif. -- Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation,
today announced availability of the critically acclaimed and much anticipated comprehensive design methodology
book for chip designers and CAD engineers that focuses on current and future advanced mixed-signal design
challenges and solutions. The "Mixed-Signal Methodology Guide" provides an overview of the design, verification
and implementation methodologies required for advanced mixed-signal designs. The book brings together top
mixed-signal design experts from across the industry -- including authors from Boeing, Cadence(R), ClioSoft and
Qualcomm -- to address the complex problems facing the mixed-signal design community.
The growing complexity of today's mixed-signal designs requires major changes in design methodology to both
increase productivity and deliver high quality products on time. This wide-ranging compendium examines in depth
such topics as AMS behavioral modeling, mixed-signal me ...
Norton Consulting provides advanced analysis, optimization, and software development services across several industries including aerospace, manufacturing, healthcare, and defense. They have expertise in areas like finite element analysis, machine vision, signal processing, biomechanics modeling, and computational electromagnetics. Their work involves developing customized solutions using techniques like topology optimization, multi-physics analysis, and high-performance computing.
An overview of the use-cases developed in the Accenture Cloud Innovation Center of Rome leveraging the partnership with Commvault that can help organizations to create business value by achieving a better management of enterprise information.
Solve Heat Transfer Challenges Quickly and Cost-Effectively With Flow SimulationEngineering Technique
To realize the benefits of using flow simulation to resolve thermal issues quickly and cost-effectively, choose a CAD-integrated application like SolidWorks Flow Simulation software. SolidWorks Flow Simulation software provides a wide range of fluid-flow and heat-transfer capabilities, which designers can use to gain greater insight into product behaviour for many applications.
This document summarizes a visual-based fire detection software that uses image processing and machine learning to detect fires faster and more accurately than existing solutions. It analyzes images from cameras to identify fires within half a second and can pinpoint the location of the fire. The software is intended to integrate with fire suppression systems to allow faster response times. It sees opportunities in industrial markets like oil and gas where reducing damage from fires can save costs and reduce insurance premiums. The team believes their solution offers advantages over thermal cameras and existing smoke detectors in speed, accuracy, and integration capabilities.
One of the most useful design analysis tools now being used in the HVAC industry is something called "CFD". "CFD" stands for "Computational Fluid Dynamics"
Network performance - skilled craft to hard scienceMartin Geddes
This document describes the technical and business journey for network operators wanting to turn network performance from a skilled craft into hard science.
The Challenge - Quick Steps For Your-Cloud Migrationschen sheffer
The document provides guidance on safely migrating workloads to hybrid or public clouds. It recommends following a multi-phase plan and learning from examples of other companies that have successfully migrated from vendors like Cisco, HP, Dell, and VMware. Example migration steps and scenarios are outlined from Cisco, Hp, and Dell migrations involving Nexus switches, virtual connect, and moving workloads between data centers over stretched fabrics. Security best practices like consistent multilayer approaches are also advised to maintain confidentiality, integrity and availability.
Enphiniti Engineering Solutions Pvt. Ltd. is an engineering solutions company established in 2008 in Bangalore, India that offers solutions in mechanical, electrical, electronic, and IT fields. It has expertise in various areas including product design and development, CAD services, mould design, sheet metal fabrication, technical publications, and computer-aided engineering. The company focuses on developing solutions for rural empowerment in areas like energy, water, refrigeration, and transportation.
Mentor Graphics is a leader in electronic design automation (EDA) software. It was founded in 1981 and is headquartered in Wilsonville, Oregon with over 4,500 employees worldwide. One of its divisions, the Mechanical Analysis Division, focuses on simulation software and services for mechanical design. It was formerly known as Flomerics and was acquired by Mentor Graphics in 2008.
Transtec has over 30 years of experience in scientific computing. It originally focused on reselling computers but later began offering customized high performance computing cluster solutions using standard servers. These clusters entered the TOP 500 list of the world's fastest systems. Transtec now looks to provide turnkey HPC solutions that are easy to manage and use, hiding complexity from administrators and users. Its solutions combine components like Bright Cluster Manager, Moab, Intel technology, and Panasas storage to deliver usability, reliability and scalability.
The document provides predictions for advancements in AI technology in 2023, including:
1) Large-scale digital twins and generative AI transforming production applications and customer service.
2) Coupling of large language models with the ability to describe biology and chemistry for drug discovery.
3) Photorealistic simulation combining with generative AI to create scenarios for training robust autonomous systems.
4) Increasing robot deployment with human interaction through learning safe operation and environments.
Exploring the Trend Toward the Edge | Eclipse IoT Day Santa Clara 2019Eclipse IoT
//ABSTRACT
Edge computing is rapidly on the rise. In this Meetup, we will explore the business drivers, technological changes, and global trends that are making edge computing the next must-have infrastructure. We will discuss the challenges that make edge computing unique in relation to cloud and data center. We will finish our exploration with real-world use cases from a variety of industries, showing how edge computing results in immediate business opportunities that you can leverage.
//SPEAKER
Kilton Hopkins, Edgeworx
This whitepaper details the use of High Performance Computing HPC in Aerospace & Defense, Earth Sciences, Education And Research, Financial Services among others...
Danfoss Shields Its Third Party Applications From Security Threats with patch...Flexera
Business Challenge: Across the organisation, Danfoss employees had increased their usage of third-party applications, and IT security required a method to effectively assess and monitor the software for vulnerabilities.
The document discusses 10 myths of computational fluid dynamics (CFD). It summarizes the original 5 myths from a previous paper, then introduces 4 new myths and discusses them further. The original myths were that CFD is too difficult, takes too long, is too expensive, cannot use CAD models directly, and that most products do not need CFD analysis. The document argues that advances have debunked these myths and made CFD more accessible. The 4 new myths discussed are that usability is not important, accuracy must be sacrificed for speed, experts are needed for accurate results, and production CAD is too complex for analysis. The document argues these new myths are also false given technological advances.
(MC²)²: A Generic Decision-Making Framework and its Application to Cloud Comp...Dr.-Ing. Michael Menzel
The document proposes a generic decision-making framework called (MC2)2 for evaluating IT infrastructure options like cloud computing. It presents an example scenario of a chocolate company called ExamChoc choosing between an in-house datacenter, third-party provider or IaaS provider for a new CRM system. Alternatives, criteria and requirements are defined for the scenario. The Analytic Network Process (ANP) multi-criteria decision method is selected and configured by defining weights and criteria dependencies. The method is applied and results show IaaS scoring higher overall but in-house being better on benefits. Future work ideas include more decision support within the framework.
Cadence Publishes Comprehensive Book onMixed-Signal Method.docxclairbycraft
Cadence Publishes Comprehensive Book on
Mixed-Signal Methodology; The "Mixed-Signal
Methodology Guide" Provides Expert Direction
on How to Address Design, Verification and
Implementation Challenges of Modern Mixed-
Signal Designs
Publication info: M2 Presswire ; Coventry [Coventry]14 Aug 2012.
ProQuest document link
ABSTRACT
SAN JOSE, Calif. -- Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation,
today announced availability of the critically acclaimed and much anticipated comprehensive design methodology
book for chip designers and CAD engineers that focuses on current and future advanced mixed-signal design
challenges and solutions. The "Mixed-Signal Methodology Guide" provides an overview of the design, verification
and implementation methodologies required for advanced mixed-signal designs. The book brings together top
mixed-signal design experts from across the industry -- including authors from Boeing, Cadence(R), ClioSoft and
Qualcomm -- to address the complex problems facing the mixed-signal design community.
"Modern mixed-signal design require new methodologies to improve productivity, reduce design time and achieve
silicon success," said Hao Fang, engineering director at LSI. "The Mixed-Signal Methodology Guide is a thorough
reference book on advanced verification and implementation methodologies. It will be particularly useful to mixed-
signal verification engineers for its coverage of analog behavioral modeling, and assertion and metric driven
verification methodology as applied to analog and mixed-signal design."
FULL TEXT
M2 PRESSWIRE-August 14, 2012-Cadence Publishes Comprehensive Book on Mixed-Signal Methodology; The
"Mixed-Signal Methodology Guide" Provides Expert Direction on How to Address Design, Verification and
Implementation Challenges of Modern Mixed-Signal Designs
(C)2012 M2 COMMUNICATIONS http://www.m2.com
August 13, 2012
SAN JOSE, Calif. -- Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation,
today announced availability of the critically acclaimed and much anticipated comprehensive design methodology
book for chip designers and CAD engineers that focuses on current and future advanced mixed-signal design
challenges and solutions. The "Mixed-Signal Methodology Guide" provides an overview of the design, verification
and implementation methodologies required for advanced mixed-signal designs. The book brings together top
mixed-signal design experts from across the industry -- including authors from Boeing, Cadence(R), ClioSoft and
Qualcomm -- to address the complex problems facing the mixed-signal design community.
The growing complexity of today's mixed-signal designs requires major changes in design methodology to both
increase productivity and deliver high quality products on time. This wide-ranging compendium examines in depth
such topics as AMS behavioral modeling, mixed-signal me.
Cadence Publishes Comprehensive Book onMixed-Signal Method.docxjasoninnes20
Cadence Publishes Comprehensive Book on
Mixed-Signal Methodology; The "Mixed-Signal
Methodology Guide" Provides Expert Direction
on How to Address Design, Verification and
Implementation Challenges of Modern Mixed-
Signal Designs
Publication info: M2 Presswire ; Coventry [Coventry]14 Aug 2012.
ProQuest document link
ABSTRACT
SAN JOSE, Calif. -- Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation,
today announced availability of the critically acclaimed and much anticipated comprehensive design methodology
book for chip designers and CAD engineers that focuses on current and future advanced mixed-signal design
challenges and solutions. The "Mixed-Signal Methodology Guide" provides an overview of the design, verification
and implementation methodologies required for advanced mixed-signal designs. The book brings together top
mixed-signal design experts from across the industry -- including authors from Boeing, Cadence(R), ClioSoft and
Qualcomm -- to address the complex problems facing the mixed-signal design community.
"Modern mixed-signal design require new methodologies to improve productivity, reduce design time and achieve
silicon success," said Hao Fang, engineering director at LSI. "The Mixed-Signal Methodology Guide is a thorough
reference book on advanced verification and implementation methodologies. It will be particularly useful to mixed-
signal verification engineers for its coverage of analog behavioral modeling, and assertion and metric driven
verification methodology as applied to analog and mixed-signal design."
FULL TEXT
M2 PRESSWIRE-August 14, 2012-Cadence Publishes Comprehensive Book on Mixed-Signal Methodology; The
"Mixed-Signal Methodology Guide" Provides Expert Direction on How to Address Design, Verification and
Implementation Challenges of Modern Mixed-Signal Designs
(C)2012 M2 COMMUNICATIONS http://www.m2.com
August 13, 2012
SAN JOSE, Calif. -- Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation,
today announced availability of the critically acclaimed and much anticipated comprehensive design methodology
book for chip designers and CAD engineers that focuses on current and future advanced mixed-signal design
challenges and solutions. The "Mixed-Signal Methodology Guide" provides an overview of the design, verification
and implementation methodologies required for advanced mixed-signal designs. The book brings together top
mixed-signal design experts from across the industry -- including authors from Boeing, Cadence(R), ClioSoft and
Qualcomm -- to address the complex problems facing the mixed-signal design community.
The growing complexity of today's mixed-signal designs requires major changes in design methodology to both
increase productivity and deliver high quality products on time. This wide-ranging compendium examines in depth
such topics as AMS behavioral modeling, mixed-signal me ...
Norton Consulting provides advanced analysis, optimization, and software development services across several industries including aerospace, manufacturing, healthcare, and defense. They have expertise in areas like finite element analysis, machine vision, signal processing, biomechanics modeling, and computational electromagnetics. Their work involves developing customized solutions using techniques like topology optimization, multi-physics analysis, and high-performance computing.
An overview of the use-cases developed in the Accenture Cloud Innovation Center of Rome leveraging the partnership with Commvault that can help organizations to create business value by achieving a better management of enterprise information.
Solve Heat Transfer Challenges Quickly and Cost-Effectively With Flow SimulationEngineering Technique
To realize the benefits of using flow simulation to resolve thermal issues quickly and cost-effectively, choose a CAD-integrated application like SolidWorks Flow Simulation software. SolidWorks Flow Simulation software provides a wide range of fluid-flow and heat-transfer capabilities, which designers can use to gain greater insight into product behaviour for many applications.
This document summarizes a visual-based fire detection software that uses image processing and machine learning to detect fires faster and more accurately than existing solutions. It analyzes images from cameras to identify fires within half a second and can pinpoint the location of the fire. The software is intended to integrate with fire suppression systems to allow faster response times. It sees opportunities in industrial markets like oil and gas where reducing damage from fires can save costs and reduce insurance premiums. The team believes their solution offers advantages over thermal cameras and existing smoke detectors in speed, accuracy, and integration capabilities.
One of the most useful design analysis tools now being used in the HVAC industry is something called "CFD". "CFD" stands for "Computational Fluid Dynamics"
Network performance - skilled craft to hard scienceMartin Geddes
This document describes the technical and business journey for network operators wanting to turn network performance from a skilled craft into hard science.
The Challenge - Quick Steps For Your-Cloud Migrationschen sheffer
The document provides guidance on safely migrating workloads to hybrid or public clouds. It recommends following a multi-phase plan and learning from examples of other companies that have successfully migrated from vendors like Cisco, HP, Dell, and VMware. Example migration steps and scenarios are outlined from Cisco, Hp, and Dell migrations involving Nexus switches, virtual connect, and moving workloads between data centers over stretched fabrics. Security best practices like consistent multilayer approaches are also advised to maintain confidentiality, integrity and availability.
Enphiniti Engineering Solutions Pvt. Ltd. is an engineering solutions company established in 2008 in Bangalore, India that offers solutions in mechanical, electrical, electronic, and IT fields. It has expertise in various areas including product design and development, CAD services, mould design, sheet metal fabrication, technical publications, and computer-aided engineering. The company focuses on developing solutions for rural empowerment in areas like energy, water, refrigeration, and transportation.
Mentor Graphics is a leader in electronic design automation (EDA) software. It was founded in 1981 and is headquartered in Wilsonville, Oregon with over 4,500 employees worldwide. One of its divisions, the Mechanical Analysis Division, focuses on simulation software and services for mechanical design. It was formerly known as Flomerics and was acquired by Mentor Graphics in 2008.
Transtec has over 30 years of experience in scientific computing. It originally focused on reselling computers but later began offering customized high performance computing cluster solutions using standard servers. These clusters entered the TOP 500 list of the world's fastest systems. Transtec now looks to provide turnkey HPC solutions that are easy to manage and use, hiding complexity from administrators and users. Its solutions combine components like Bright Cluster Manager, Moab, Intel technology, and Panasas storage to deliver usability, reliability and scalability.
The document provides predictions for advancements in AI technology in 2023, including:
1) Large-scale digital twins and generative AI transforming production applications and customer service.
2) Coupling of large language models with the ability to describe biology and chemistry for drug discovery.
3) Photorealistic simulation combining with generative AI to create scenarios for training robust autonomous systems.
4) Increasing robot deployment with human interaction through learning safe operation and environments.
Exploring the Trend Toward the Edge | Eclipse IoT Day Santa Clara 2019Eclipse IoT
//ABSTRACT
Edge computing is rapidly on the rise. In this Meetup, we will explore the business drivers, technological changes, and global trends that are making edge computing the next must-have infrastructure. We will discuss the challenges that make edge computing unique in relation to cloud and data center. We will finish our exploration with real-world use cases from a variety of industries, showing how edge computing results in immediate business opportunities that you can leverage.
//SPEAKER
Kilton Hopkins, Edgeworx
This whitepaper details the use of High Performance Computing HPC in Aerospace & Defense, Earth Sciences, Education And Research, Financial Services among others...
1. Simtec, a Leading Software for CFD Fire Simulation
ADV AN CE D M O DEL S T O E NH AN CE FAST CO M PUT ATIO N T O RED UC E
SIM ULA TIO N RELI ABI LI T Y SIM ULA TIO N TIM E
PO W ERF UL P RE PRO C E SSO R TO PO W ERF UL PO S TPRO C ESS O R TO BE ST
RED UC E M O DEL SET U P T IM E PRE SEN T TH E SIM ULA TI O N R ESU LT
G R AP H I C AL U S E R IN T ER F AC E FO R FAST AND FREE SUPPORT
CO N V E NI EN C E O F U S E
2. Information Technology Solutions
"I h av e work e d o n f ir e pro tec t i on des i g n i n my f ir e c o ns ul t i ng wor k . I
hav e do n e s o me s i mu l at i o ns us i ng F D S a n d a ls o h e lp e d w i th
s i mu l at i o ns us i n g C F X. My ex p er ie nc e is th a t t h e mo s t c o m mo n
pr o b l ems i n t he CFD mo d e ls ar e t h e t im e r eq u ir ed , g e om e try i m por t
an d a l i gn m en t o f gr id / mes h .
At pr es e nt I per f orm th e s i m u la t io n w it h S i mt ec i ns t e ad . I h av e
d is c ov er ed t h at g e om etry im p ort in Si m tec is inc r e d ib ly q u ic k an d
eas y , a n d th a t th e r es u lt is g oo d. W he n a rc h it ec t has no t pr o duc e d a
c om p l et e 3 D A u to CA D m od e l, it is e as y t o s e lf - dr aw t h e m o de l in t h e
fr e e pr o gr a m Sk e tc h u p a nd im p ort in to S im tec . T o a d jus t gr i d /m es h
of t he mo d e l do es n ’t r eq u ir e d irec t w ork . S i mt ec d oes it a ut o m at i c a lly
for t h e us e r .
W ith S i m tec , I h av e s i mu l at e d f ire an d s m ok e s pr ea d i n a d e pa rt m en t
s tor e c ov er i ng a bo u t 20 00 0 m2 w it h c om p l ic at ed a nd d et a i l ed
ge o me tr y . T h is w as p rev io us ly i mp os s i bl e wi t h o t her CF D s of tw are .
Th e s i m u la t io n inv o lv i ng a bo ut 4 m i l l i on c e lls , t o ok 3 6 h o urs o n a
c om p ut er w h ic h c os ts a b ou t 1 00 0 0 S we d is h k r o na . Pr ev i ous ly , I h a d
to ex c l u de p ar ts of t h e b u i ld i ng ge o me try .
It h as pr ov e d t o g iv e g oo d r es u lts at v a l i d at i ons . S i mt ec a ls o g i v es
v er y go o d s i mu l at i ons for t h erm a l r a di a ti o n i n a w ay th a t F D S an d
CF X ar e un a b le t o d e l i v er.
In s h or t, I w i l l he nc ef o rth us e Si m tec f or f ir e s i mu l at i o ns . "
- Jonas Lindsten
Fire engineer and civil engineer risk management
BrandskyddsDesign, Sweden
3. Information Technology Solutions
CFD (Computational Fluid Dynamics)
simulation, the base for design and
optimization
Importance of fluid dynamics, heat transfer cases, CFD simulation is the only possible
IMPORTANCE OF FLUID and combustion - Fluid dynamics, heat measure for such analysis.
DYNAMICS, HEAT transfer and combustion are of great
importance in daily life and industrial The power of CFD fire simulation - Fire is
TRANSFER AND
applications related to fire safety, energy, extremely complicated with fluid dynamics,
COMBUSTION environment protection, construction, heat transfer and combustion all involved.
chemical production, military and so on. In As for other applications, previously,
all these applications, fluid dynamics, in analysis of fires was either by small scale
many cases together with heat transfer and fire experiment in lab or by empirical
CFD SIMULATION AND combustion, is involved in the design and estimation. Consequently, fire safety
optimization of the system and the design was based on prescription code
ITS ADVANTAGES
products. In any application which may which is developed based on small scale
involve gas flow, and also possibly heat fire experiment data or empirical
transfer and combustion, the analysis of estimation. With the fast development of
fluid dynamics, heat transfer and computer hardware and the CFD
THE POW ER OF CFD combustion process very much helps simulation technology, comprehensive fire
F I R E S I M U L AT I O N innovate or optimize a system or a product simulation becomes possible and is
to best achieve desired function. recently more and more widely used in
both fire research and fire safety design
engineering. In fire safety design
S i m t e c , L E AD I N G F I R E CFD simulation and its advantages - In engineering, with proper CFD fire
modern society, as the system and product simulation, the fire performance can be
S I M U L AT I O N become more complex, the complexity of analyzed and optimized in a virtual
TECHNOLOGY fluid dynamics, heat transfer and environment. This enables a very efficient
combustion also drastically increases. Due and cost-effective analysis of individual fire
to the complexity, previously the analysis scenario and thus the fire safety design
of fluid dynamics, heat transfer and can be performance-based.
combustion can only be performed by
experiment or using empirical estimation.
However, experimental analysis has Simtec, leading fire simulation technology -
serious limitations. It can be very Simtec (Simulation of Thermal Engineering
expensive and time consuming, etc. In Complex) is a leading CFD fire simulation
many cases, experiment is not even software with state of art simulation
possible. Empirical estimation has very technology. After more than 20 years of
limited applicability and reliability. research and development, Simtec is now
publically released. Backed by reliable
technology that has been verified and
CFD computer software provides a tool to validated by both academic researchers
design and optimize a product and system and industrial customers, Simtec is a tool
in virtual environment by performing of choice for CFD fire simulation.
computer simulations, where the analysis
of fluid dynamics, heat transfer and
combustion is made by numerically solving Simtec deploys advanced models to
the extremely complex engineering maximize simulation reliability and the
equations. CFD simulation allows cost- novel numerical techniques to reduce
effective and efficient analysis. In many simulation time. The reliability provides you
4. Information Technology Solutions
Simtec – the CFD software of choice for
simulation of fires, ventilation and others
the confidence to expect that the simulated considered to be wrong by fire professor
Simtec TECHNOLOGY (to fire safety system will perform, as and experts, but was later fully supported
be continued on next designed, in the real world. The high by fire experiment.
simulation efficiency enables you to do
page)
more in less time with fewer resources. ’ your code (Simtec) without any doubt is
very advanced and powerful.’ – from a
ADVANCED
Simtec customer
Among the Simtec technologies, some are
MODELS recently developed and held from
publication and thus not available in To reduce the simulation time without
anywhere else. compromising the simulation reliability,
ADVANCED
Simtec deploys advanced numerical
NUMERICA L solution technology together with fully
SOLUTION
Simtec features and advanced technology: automatic parallel computing function. This
allows a fast simulation and brings
advanced models to enhance significant simulation flexibility. Simtec
simulation reliability customers commented Simtec simulation
efficiency as
GRAPHICAL
fast computation to reduce
USER simulation time ‘that's is really impressive’
INTERFACE
graphical user interface for ‘got really good information in just 20
convenience of use minutes computation. That is impressive!’
POW ERFUL
powerful preprocessor to reduce ‘It is amazing how fast Simtec is when
PRE-
model setup time running a scenario with this big geometry.
PROCESSOR Impressive!’
powerful postprocessor to provide
desired methods to best present
the simulation result For convenience of use, Simtec also
provides its integrated GUI (Graphical User
Interface). From the GUI, you can easily
Simtec deploys advanced models to perform all the needed functions which
virtually simulate the processes in the real include pre-processing, computation,
world, thus enhance the simulation control of computation, simultaneous
reliability. The reliable technology has been visualization of computation and post-
very well verified and validated by both processing, etc. Simtec GUI also supports
academic researchers and industrial different languages which can be changed
customers. In a series of validation tests, anytime.
Simtec simulation very successfully
predicted the real fire process without
knowing the real fire measurement data in To start a simulation, a case setup must be
priori. In an academic research, Simtec created first. The setup normally includes
even predicted a very unusual fire general problem description, geometry
phenomenon. The prediction was specification, boundary condition
5. Information Technology Solutions
Simtec – the CFD software of choice for
simulation of fires, ventilation and others
specification, initial condition specification For meshing, Simtec provides automatic
Simtec TECHNOLOGY and meshing. With Simtec pre-processor, mesh. Meanwhile, Simtec also provides
you can first easily create a new project pre-processor to let you modify any parts
and intuitively make change if necessary of mesh. Thanks to the deployed advanced
POW ERFUL
for the general problem description. For fire numerical solution technology, Simtec has
PRE- simulation, normally the time-consuming essentially no limitation on mesh.
PROCESSOR
work is the geometry specification. Simtec
has a powerful geometry construction pre-
processor. More importantly, to drastically After simulation, you can use Simtec very
reduce the time of creating geometry powerful post-processor to generate chart
model, Simtec provides a very powerful 3D plot data and visualize your results using
POW ERFUL
geometry import facility. You can create slice scalar plot, vector plot and 3D
POST- your geometry model using many Auto- rendering, etc.
PROCESSOR
CAD programs and then easily import it to
Simtec. In many cases, the 3D Auto-CAD
geometry may already exist. You will then Simtec applications – Simtec has very wide
Simtec APPLICATION just need to import it directly. If the CAD application areas. It can be used in fire
geometry does not exist, it is very easy to safety engineering, HVAC (Heating,
CASES (to be continued
self-draw the model using the free software Ventilation, and Air Conditioning), energy
o n n e xt p a g e ) Sketchup and then import. engineering, environmental engineering
and chemical engineering, etc. The related
‘The import feature of the (Simtec) update industries include construction, transport
is really good! I managed to import a large (tunnel & metro), chemical production, oil,
and complicated building in one minute. mining, military, aeronautics and space,
That's impressive! And more important, I nuclear, and environment protection, etc.
think that the imported geometry looks
really good.’ – from a Simtec customer.
Fire safety application is one of the main
‘I tried my import, and it looked really good! focus for Simtec. Simtec simulation
When I did an import it was really fast.’ – provides information on flow of gases,
from a Simtec customer. transient variation and spatial distribution
of pressure, temperature and
concentrations of smoke and different
Once geometry model is constructed, gases, variation of visibility for fire escape
Simtec has a very powerful geometry evaluation, heat flux on structure, three
processing capacity. With this geometry dimensional temperature distribution inside
processing, all the boundaries will be construction structure exposed in fire
automatically identified. However, if you do (Simtec provides an integrated fully
have particular type of boundary conditions coupled computation of three dimensional
to be imposed, you can easily use Simtec heat transfer inside the construction
boundary condition pre-processor to structure), fire growth, and fire
specify your particular boundary extinguishment by sprinkler, etc.
conditions.
6. Information Technology Solutions
Simtec – the CFD software of choice for
simulation of fires, ventilation and others
Simtec APPLICATIO N
C AS E S ( t o b e
continued on next
page)
FIRE ACCIDENT Simtec used for fire safety design of a
Simtec fire reconstruction and Swedish complex building. The geometry
RESCONSTRUCTION
investigation. Simtec successfully model is directly imported with ease from
& FIRE reconstructed the big fire accident 3D CAD geometry file.
INVESTIGATION happened in 1998, in Goteburg, Sweden
TUNNEL FIRE
ANALYSIS
COMPLEX BUILDING
FIRE SIMULATION Simtec used for fire safety design of a
Swedish mine. Simtec advanced solution
method makes this type of simulation very
SIMULATION OF FIRE Simtec used to analyze tunnel fire. Simtec easy and efficient. (Simtec customer
IN MINING has great advantage for simulation of commented: ‘Simtec has great advantage
tunnel fire. It can simulate the fire in a long for such complex simulation. A large
tunnel very efficiently, even on a simple geometry divided into mesh with different
SIMULATION OF FIRE desktop computer. sizes on cells depending on where the fire
EXTINGUISHMENT
is.’).
Simtec was successfully used to simulate
BY SPRINKLER
fire in a 4.8 km tunnel at its full length,
using a desktop computer. With Simtec
capability, more complicated tunnel fire
simulations are on planned by Simtec
users.
(Simtec users commented: ‘Simtec has
made such simulation easy. We could not
make such simulation at all without using
Simtec’).
Simtec used to analyze fire extinguishment
by sprinkler. Thanks to the deployed
unique combustion model, Simtec well
captures the fire extinguishment by
sprinkler.
7. Information Technology Solutions
Simtec – the CFD software of choice for
simulation of fires, ventilation and others
Simtec APPLICATIO N
CASES
SIMULATION OF
HIGH SPEED GAS Simtec simulation of high speed gas
leakage fire. Simtec advanced solution
LEAKAGE FIRE
method makes this type of simulation very
easy and efficient. (Simtec users
SIMULATION OF OIL
commented: ‘It is very easy to make such
simulation with Simtec. When tried to use
POOL FIRE the free software, the simulation was with
numerical problem and could not go
through.’)
SIMULATION OF
Simtec analysis of coupled three
SPONTANEOUS dimensional heat transfer inside solid
IGNITION FIRE structure exposed to fire. Shown is the
temperature at solid structure outer
surface, temperature at 3 mm inside from
COUPLED THREE outer surface and temperature at a
horizontal slice section(the structure is
DIMENSIONAL
internally empty)
CALCULATION OF
Simtec simulation of evaporating oil pool
SOLID STRUCTURE fire. Simtec advanced solution method
TEMPERATURE IN makes this type of simulation smooth and
efficient, the result is also consistent with
FIRES typical oil pool fire data. (Simtec user also
tried to simulate it use the free software,
the free software predicted heat release
rate of around 40 MW/m2 which is likely
too far from reality, and also eventually ran
into numerical problem.)
Heat exchanger plate geometry
Simtec simulation of spontaneous ignition
fire. Thanks to the unique spontaneous A X-slice temperature A Z-slice temperature
ignition fire simulation capacity, Simtec
very well predicted the unknown Simtec easy simulation of heat exchanger,
spontaneous ignition fire phenomena to analyze flow and heat transfer in heat
which were later confirmed by experiment. exchanger
8. Information Technology Solutions
Ideon Science Park
Scheelevägen 15, Alfa 3
223 70 Lund, Sweden
Tel: +46 7339 15278 or +46 7068 26629
Email: Info@simtecsoft.com
Website: http://www.simtecsoft.com